I have 2 routers and 2 subnets. I'd like to switch routers.

hummerwar921 · **Posted:** June 30th, 2008, 7:45 pm

192.168.2.108 is my Xbox 360's IP address.

192.168.2.2 is the router's IP address.

My router is 192.168.1.1.

I have internet from the 1.1 router, how do I switch to 2.2 wirelessly?

Adbot · **Posted:** June 30th, 2008, 7:45 pm

Ranging God · **Posted:** July 3rd, 2008, 9:38 am

hummerwar921 wrote:

192.168.2.108 is my Xbox 360's IP address.

192.168.2.2 is the router's IP address.

My router is 192.168.1.1.

I have internet from the 1.1 router, how do I switch to 2.2 wirelessly?

CAnt you just connect your xbox wirelessly since it is connected o teh same Subnet? I really have no experence with xbox's but I know with computers, you can connent when your in the same subnet.
Which your Xbox is in the same so

hummerwar921 · **Posted:** July 3rd, 2008, 10:49 am

My Xbox is already connected via ethernet, which is a cable.

I'm trying to switch subnets.

I need to make it so my subnets can each interact with each other.

Ranging God · **Posted:** July 3rd, 2008, 11:27 am

hummerwar921 wrote:

My Xbox is already connected via ethernet, which is a cable.

I'm trying to switch subnets.

I need to make it so my subnets can each interact with each other.

But can't you have it so your COmputer and xbox are ont eh same Subnet?

jrdgames · **Posted:** July 6th, 2008, 6:55 pm

Is there a specific reason that you are running two subnets?

Does an Xbox have to be double nat'ed? I do not own one so I do not know much about them.

Ranging God · **Posted:** July 7th, 2008, 6:31 am

[quote="jrdgames"]Is there a specific reason that you are running two subnets?
quote]

Thats what i was thinking, I am pretty sure they are on the same SubNet, which is .2. right?

Adbot · **Posted:** July 7th, 2008, 6:31 am

jrdgames · **Posted:** July 7th, 2008, 11:38 am

Could you provide a network diagram? eg:

Code:

internet
___|
router > 192.168.1.1
___|____________|
computers___router > 192.168.2.2
______________|
xbox > 192.168.2.108

If your network is setup like this then both routers should be providing internet and you would have two subnets (192.168.1.x and 192.168.2.x).

If you want to make the whole network run on one subnet (192.168.1.x) then you should be able to move the ethernet cable going into the second router from the "internet" port into one of the network ports, the router will then act as a switch only.