Runescape Bits & Bytes
https://www.rsbandb.com/forums/

Going for 68 smithing
https://www.rsbandb.com/forums/viewtopic.php?f=34&t=24253		 Page 1 of 2
Author:  Rune Nerd [ January 2nd, 2006, 2:46 pm ]
Post subject:  Going for 68 smithing
i'm going from 60 smithing to 68 smithing, making steel platebodies. If there are any other faster ways for an f2p-er tell me.
Author:  Adbot [ January 2nd, 2006, 2:46 pm ]
Post subject:  Register and login to get these in-post ads to disappear
Author:  xOhYax [ January 2nd, 2006, 3:24 pm ]
Post subject: 
make throwing knives...same exp, but something usefull
Author:  Rune Nerd [ January 2nd, 2006, 4:09 pm ]
Post subject: 
Again, NON-MEMBER methods please, lol
Author:  Waynehead [ January 2nd, 2006, 4:24 pm ]
Post subject: 
Platebodys are probably your best bet.
Author:  Rune Nerd [ January 2nd, 2006, 4:35 pm ]
Post subject: 
ok, i'll work on it
Author:  Tidus [ January 2nd, 2006, 5:07 pm ]
Post subject: 
i dont know, but i think that if you ask a Member friend to make iron bars for you(you only get iron ores), it would take less time to make iron plates, because you dont need to get coal, etc.

do as you wish, but for me, its gonna be 57-75 with iron plates(xp) and steel bars($$$)
Author:  Adbot [ January 2nd, 2006, 5:07 pm ]
Post subject:  Register and login to get these in-post ads to disappear
Author:  CreepyPirate [ January 2nd, 2006, 6:13 pm ]
Post subject: 
Steel plates all the way. 8)

Take it from a 70+ smither.
Author:  Rune Nerd [ January 2nd, 2006, 6:31 pm ]
Post subject: 
Thx for advice lol 8)
Author:  MetalManiac9 [ January 2nd, 2006, 6:37 pm ]
Post subject: 
yea, plates r good
Author:  Christopher [ January 2nd, 2006, 11:04 pm ]
Post subject: 
I disagree completely. Steel Plates don't give that much xp per $$$ and they don't save you any money. For starters smithing anything bronze (except bronze plates which give you less per bar) is the best bet. Iron is next. Beyond that you might make steel bars. Slow... but you make much more money. If money isn't a problem then Iron bars are the best way to go unless you can find the elusive bronze bars.
Author:  Rune Nerd [ January 3rd, 2006, 9:53 am ]
Post subject: 
If I am right, Iron Platebodies give 125 exp each and are easier to make, since the only ore you need is iron. But the problem is the smelting, so if I get a ton of iron ores, which is easy, I will only need to make around 3500 iron plates until 68, which doesn't seem like a lot, compared to 2500 steel.

So based on what I know, a vote for other :P
Author:  CreepyPirate [ January 3rd, 2006, 10:16 am ]
Post subject: 
Quote:
I disagree completely. Steel Plates don't give that much xp per $$$ and they don't save you any money. For starters smithing anything bronze (except bronze plates which give you less per bar) is the best bet. Iron is next. Beyond that you might make steel bars. Slow... but you make much more money. If money isn't a problem then Iron bars are the best way to go unless you can find the elusive bronze bars.


If money isn't a problem why not steel? Even if money is a problem steel is still a good way to go.

Iron isn't a good choice in my book because unless you're a member, with access to a lot of rings that can do the 100% smith rate you just end up losing 50% of the iron you smelted making it a huge waste of time. If you buy the resources you lose 50% of what you brought. And if you mine it again you lose out on half the work you put in.
Author:  Rune Nerd [ January 3rd, 2006, 11:45 am ]
Post subject: 
I see..thanks bacon
Author:  Lisaz [ January 3rd, 2006, 1:44 pm ]
Post subject: 
if i were you than ill make steel bars but i maybe try to ask some member friend that he can smelt those iron ores for you... than its 100 procent
Author:  Rune Nerd [ January 3rd, 2006, 2:09 pm ]
Post subject: 
Would anybody here be willing to smelt iron for me? :P
Page 1 of 2 All times are UTC - 7 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/